Owning a vape device means that you need to be able to clean it from time to time. Like all products, your e-cig will require maintenance to make sure it continues to perform at a satisfactory level.
Knowing how to clean vape parts is therefore essential. Your tank, coils and mouthpiece are all important areas to start with, because they can accumulate a lot of issues over time.
So let’s take a look at what you need to do in order to effectively clean your vape device, focusing specifically on the tank, coils and mouthpiece.
So let’s talk about how you actually clean out a vape tank. It’s not a massively difficult process but you have to consider that there is a certain way to do this to avoid damage to it.
So here’s what you’re going to want to do. First of all, fill a bowl with some warm water. Then, get your tank ready by taking it away from everything else. This is the important bit. Not all of the components for your device are waterproof.
Remove all of the remaining e-liquid from the tank. Now, you're going to want to think about disassembling your tank. Doing this will allow you to begin to clean your tank.
Knowing how to clean a vape tank isn't easy. It’s not exactly widely documented knowledge. Wash all of the parts inside the warm water, being careful to scrub at any tough stains which have built up.
When you are done with this, put all of the pieces onto a paper towel. Allow the pieces to air dry before you reassemble the tank.
Another piece of your device that you can learn to clean are the coils. The coils of your electronic cigarette are a very important aspect, and they should be properly maintained in order to get the best performance.
Here’s what you’re going to want to do. You’ll want to expose your coils to some kind of cheap spirit - vodka is the recommended choice for this. Vinegar or ethanol will work just as well.
Regardless of what solution you choose, you’re going to want to soak the coils for a few hours and let them remove any lingering traces of e-liquids.
Once this is done, extract the coils and then rinse them under cold water to purge the alcohol from the system. Be careful during this process - accidental inhalation of alcohol can have consequences which are undesirable.
Once you have finished this, you will want to then make sure that you have left the coils out to dry. This helps them to dry out properly and ensures that you don’t have to worry about alcohol inhalation.
So you probably want to know how exactly you can clean out your vape mouthpiece. Well you’ll be pleased to know that it’s not especially difficult.
Here’s what you’re going to want to do. First of all, take a swab and dip it into some cheap vodka or ethanol. Then, use it to clean around the mouthpiece and inside it too. The alcohol helps to break down any residue which can come from your e-liquids.
Once you have finished cleaning out your materials, you’re going to want to rinse them with water. This is important because it means that you don’t have to worry about whether or not you’ve got any alcohol left floating around on the mouthpiece.
Once you’ve done this, you just need to make sure that you leave the mouthpiece to dry in the air, and then it will be suitable to use again. Air drying is one of the best ways that you can properly look after your device because it requires no physical contact, and no risk of damaging anything.
In conclusion, these are just a few of the different options that you have when it comes to cleaning your device. Understandably, you want to make sure that your vapour device remains in the best condition for as long as possible, because this means that you will not have to replace it. Equipment maintenance is a pretty standard part of looking after any type of device, and this is no different. You are going to want to make sure that you invest in the correct amount of options, and really think about what you want from your system. There is no doubt that this can be a challenge to work out, but you need to try and figure out how to clean out your device in the best way possible. You need to look after it to make sure that you get the optimum performance. The best tools are the ones which are carefully looked after, so remember to keep yours up to date or check the site for replacement parts.