How To Blow A Jellyfish

Transcript

Hi guys, it’s Minty Mechanic on You Tube. Thanks for joining me on my show. I’m going to be doing a tutorial today that hopefully will blow you guy’s socks off.


I do have to warn you it’s going to be a lot like my ‘how to blow an O like a pro’ video where I go to some in depth stuff to show you guys just exactly what you need to do in order to blow a jellyfish properly. Now there are many names for this trick that I’m sure you’ve heard, you know, like atomic bomb, jellyfish, force field around an O, but I prefer to call them a jellyfish because whenever you blow a jellyfish it looks like a jellyfish. No lie, it actually does.


So, without further ado, we’re going to go ahead and get started. I think I will start off by saying that if you have not seen my ‘how to blow an O’ video, this is going to be very important. In fact, I might even call this video, ‘how to blow an O like a pro advanced’ because this entails a lot more technique and a lot more style that allows you as a person who wants to learn these tricks to really perfect that you’re going to do this.


So the first thing that you’re going to need, as I start out in every video is a decent eliquid and vaporiser. Now if you don’t have one, then you shouldn’t be watching this video. If you want to just watch this for kicks, then fine. Yeah, sure like the video, leave a comment, ask me questions. I have no problem with that, but just make sure that you have the right tools to do this otherwise it’s going to be to be a bit more difficult.


What I’m using is here with my eliquid is my classic dimitry mod. I love this thing so much. I beat it up a little bit, but it’s tough and I have got two FS batteries with 35 amp peak capability as well as 2500 ma and it is a 3.7 volt battery. They’re purple and they’re pretty cool.


Also the other thing that I’m using currently on here is my Mutation XV2 and for those of you who are sceptical of my Mutation XV2 it is legit. If you can see it right there, hopefully you can. It says XV2. I’ve got the original serial number and the warranty that comes with it and everything. It’s the original.


Now I’m packing some hard core dual parallel build 22 gauge canthol and this is the most heavy duty build I’ve ever gotten. It comes in on my own meter at .01 ohms, so I’m doing some hard core low ohm build but with this [0:02:48.8] it makes it really easy on my batteries so I’m not doing anything crazy but I get hell clouds so be prepared to need a mod that produces some sick clouds because with this type of trick you’re going to need something that really gives you that boost of clouds whenever you need it. Once we get into this, we’re going to I mean, it’s going to be pretty easy to learn hopefully with my instruction, but I appreciate for those of you who are watching this video I appreciate you guys so much for all the subscriptions. I’ve almost reached 100 subscribers already and I think that is really cool. So thank you guys so much for all of your support, especially on Instagram for those of you who have come from Instagram. I seriously appreciate you guys, thank you.


Let’s get to it. Okay, so now the first thing that you’re going to need to learn is how to blow an O. Like I said earlier you’re going to need to blow a proper O once, not like four O’s and then you’re going to get the jellyfish. That’s not how it works. You need to learn how to blow a single blow and it has to be good because if you watch, like all of those guys that you see on the vape videos, they blow one or two’s O’s but they’re not doing anything crazy, you know. What they’re doing is doing what’s called a set-up or at least that’s what I call it. I’m inventing my own terminology at this point because these tricks are very learned but the technique is not passed on. In fact I’m pretty sure that this might be the only tutorial video on how to blow a jellyfish so I’m going to make it good, alright, so you guys better enjoy it.


To blow a proper O, as I said before in the video, you need to go to my video and watch that. If you haven’t watched it, watch it. Now once you’ve learned that you have to pop a single one. We’re going to do it like this, a lot like this. Let’s try.


Okay, so you’re going to need to do something along the lines of that. You need to get something that pops out fast because what we’re trying to accomplish is a lot of spin. The more spin that you have on your O the more eliquid vapour you’re going to be able to pour round it. Therefore creating that force field jellyfish effect and it’s going to look really good if you have a lot of velocity on that O.


So I’m going to show you guys a couple of tricks on how I get it to go properly. Now the first thing that I do as far as the velocity of the O, and that’s really important That’s probably the most important factor of jellyfish is how fast your O is travelling. If it’s not travelling fast enough and if it’s not thick enough, you’re not going to get it to go around. Now that we know that, we can go ahead and started with the technique.


Now the first thing that we’re going to go into as far as technique goes is bending. I haven’t made a video on that quite yet, but I am going to very soon. I’m going to cover all the things that I know about bending and then in the next video I’m going to cover some coil stuff and make sure you guys know how to pack your cotton properly, how to wrap a coil properly, how to make sure that you have a decent coil, that you’re not getting any hot spots in your coil. I’m going to go over all of that for you guys in detail. So for those of you who are watching this, you’re some detail orientated people who want to know all the nitty gritty stuff, this video is for you and you’re going to dig this.


Alright, so let’s go ahead and get started. What we’re going to do is we’re going to go ahead and start by learning a simple bend. There is nothing really too difficult to it but this is important for the jellyfish, so let’s go ahead and do that. It is a difficult trick to do but you can get used to it.


Now the first thing that I would start off by saying is that you’re going to have to do something along the lines of, so here’s your O. You have to blow a single O and you want to make sure that you do that puff that I was talking about. So the first thing that I was talking about earlier is that you use the ghost inhale technique. Now there’s a way to blow out a puff of air and then suck it back in and that’s called the ghost inhale. You want to do something like that in the centre of the jellyfish without inhaling and you want to make sure that you have a lot of breath control.


Also I wanted to let you guys know that the air flow in my room is terrible so if you guys can do this – If I can do it in here, then anybody can do it any room. It’s really difficult to do pretty much any trick in this room because it’s so open but the air is moving around pretty much all the time because of this hallway and the cooling system. There’s a lot of technical problems with this house.


Anyway, the first thing you’re going to start off is blowing a single O and we’re going to start with learning how to bend. Now what we’re going to do is I’m going to show you guys a couple of bends and then we’re going to go ahead and try a jellyfish after that.


So here’s a bend


Okay, so you’re going to want to be able to do something like that but forward, so we’ll try that and I’ll show you guys sideways


Okay, so like I said, the air flow in here is terrible. It’s hard to blow O’s because the air is always moving. I’m going to go ahead and show you guys just exactly what you need to do in order to blow a jellyfish.


Now the first thing that I recommend is that you blow two, not one O. Now I know that I said make sure you blow a perfect O every time. That’s the truth, but whenever you blow a single O and then blow another one through that, that second O is going to move a lot faster because of the way that the air flow works through the first blow O, blowing that second one will speed up the process of getting that to spin really fast so that you can blow that little puff of vape right into the centre of that O and then what’s going to happen is that is going to be pulled around and you’re going to create a jellyfish, and it looks balling every time.


So let’s try that. Make sure you have a lot of room. See, it’s terrible in here. It’s terrible.


Alright, let’s try that from a little bit further away, just so you guys can get a good view of it


There we go. Alright. We’re going to go back to normal view to show you guys and talk about what happened and what I did and how to accomplish that properly.


Okay, so now that we’re back. Whenever you blow an O, like I talked about in the first video that I made, ‘how to blow an O like a pro’, that O pulls air through it and it spins and spins and spins and eventually dissipates, Now what you want to do is make sure that the key factor of the O that you blow is the speed and the velocity of the O how fast it’s going and how fast it’s spinning. You want to make sure that it’s spinning the fastest that it can before you blow into that, otherwise it’s not going to work and your O is going to look like crap. So what I did was I made sure that I blew two or three O’s. You want to get your O going really fast before.


Now whenever you blow an O through an O, that secondary O is going to go much faster, but whenever you get to that final stage a lot of people – what a lot of people do is they go up into the O really fast and shake their camera, and whenever you do that that stops the air flow and it dissipates your O instantly. So you have to move very carefully and stay about this far away from your O, and you want to use as little air as possible. Just let the eliquid vapour out much like you would in the case of a ghost inhale. And once you’ve done that then you’ll be able to properly blow a jellyfish and it is really cool to see. It takes a lot of practice.


I have to emphasise on the amount of practice that it takes because it took me about a month to figure out how to get it proper.


I’m going to go ahead and talk a little bit about how to blow those little bit further away from your face. Now whenever you go to blow a jellyfish you want to make sure that O is flying like super fast. Now the way that I do that for the most part is I take a good amount of vape. You’re not taking a lung full like you’re taking a cloud. I’ve noticed that they don’t take a whole lot of vapour in whenever you go to blow an O, especially pro guys like the V Gods or whatever.


The reason of that is that whenever you take a full lung inhale, you won’t have the ability to properly cough because your lungs are filled with that vapour and it’s thick and heavy and you won’t be able to properly blow out enough vapour to really blow an O. The reason that is, is because it stops up your lungs and you don’t want to. You won’t be able to breathe out fast enough, so you take in about that much and that’s why you need a really good mod, because if you don’t have enough eliquid vapour then you’re going to not be able to blow your jellyfish, but you have too much vapour then you’re going to run into issues with your ability to properly push out the eliquid vapour. You’re going to cough and it’s going to be retarded.


So find your balance and make sure you have just enough to do it and then take more if you need it. That’s why you see those guys taking more hits because what they do is they expand their O and then they blow into the jellyfish and it works, and it’s because of the fact that they give themselves enough room to blow that O.


Now that’s a lot of information, but that’s how it works.


Anyway, thanks for watching my video. This has been Minty Mechanic. We’ll see you guys later. Peace out.