Innokin Endura M18: Instruction Manual and Troubleshooting Guide

Innokin Endura vape pens have been mainstays in vape shops for almost as long as vaping has existed. They’re dependable and easy to use. They’re also refillable, so they give vapers the opportunity to choose their own e-liquid flavours instead of being limited to the few flavours available for a pre-filled device. The tastes of the vaping community have changed in recent years, however; pod systems are all the rage these days, and the product designers at Innokin have had to keep up with industry trends.

The Innokin Endura M18 is a brand-new pod-based vaping system featuring everything that’s great about the Endura product line. It’s exactly the type of vape pen that you want if you’re new to vaping – and if you’re currently using a pre-filled device and want to upgrade to a device you can fill yourself, you couldn’t ask for a better pod system than the Endura M18.

This is our Innokin Endura M18 instruction manual. In this guide, we’ll help you get up and running with your new device quickly by explaining the most important aspects of using the Endura M18. We’ll also explain how to fix the problems that you might encounter when using this device.

Are you still looking for the perfect beginner-friendly pod system for your needs? You can grab the Innokin Endura M18 right here for just £24.45. Buy yours now!

How Does the Innokin Endura M18 Compare to Previous Endura Vape Pens?

There are two features that have always defined the Innokin Endura product range. The first thing is the push-fit coil replacement system. Owners of previous Endura models have loved the fact that you can replace an Endura vape coil simply by pulling the old coil out and pushing the new one in. The Innokin Endura M18 has that feature.

The second feature that people love about the Innokin Endura brand is the Bottom Vertical Coil (BVC) system. Innokin’s BVC coils work well with a wide range of e-liquid thicknesses. They deliver large, satisfying clouds of vapour that are also cool and pleasant to inhale. The engineers at Innokin have developed a completely new coil for the Endura M18 that’s based on the BVC technology but delivers even better flavour. If you own another Endura vape pen and want to have that same experience with the Endura M18, you can also use the short version of Innokin’s 1.5-ohm BVC coil with this device. The new Endura M18 BVC coil has a resistance of 1.6 ohm.

How to Use the Innokin Endura M18

When you get a new vaping device, you don’t want to spend an hour reading the instruction manual – you want to start vaping as quickly as possible. That’s why this Innokin Endura M18 guide exists. In the next section, we’ll explain the most important things that you need to know. When you’re done reading, you’ll be ready to start using the Innokin Endura M18 immediately.

How to Charge the Innokin Endura M18

One of the features that people have wanted to see in the Endura range for a while is faster charging, and the Innokin Endura M18 delivers in that department with a built-in USB-C port. Connect the included charging cable to your computer and to the USB-C port on the bottom of the device. When all three white LEDs are lit, the device is done charging.

How to Fill the Innokin Endura M18

With the Innokin Endura M18, you’ll find the filling port on the side of the pod. To fill the pod, remove it from the device and remove the silicone plug with your fingernail. Inject e-liquid until the pod is nearly full before replacing the plug and putting the pod back inside the device.

How to Replace the Innokin Endura M18 Coil

When your Innokin Endura M18 no longer produces a pleasing flavour, it’s time to replace the coil – and the Endura M18 features the same push-pull coil replacement system that has made the Endura brand famous. To replace the coil, remove the pod from the device and invert it. Twist the base on the underside of the pod counterclockwise to release the lock on the coil. Pull the base away from the pod and lift the coil straight out. Push the new coil in, replace the base of the pod and turn it clockwise to lock it. Refill the pod and let it rest for a few minutes before you resume vaping.

How to Vape With the Innokin Endura M18

The Innokin Endura M18 continues the Endura tradition of delivering simplicity and satisfaction in a single classy package. Using the device couldn’t be simpler; just charge the device, fill the pod and puff on the mouthpiece to vape.

When you use the Endura M18, you can adjust the device in two ways to change your vaping experience. The first way is by adjusting the airflow. To switch the pod between its two airflow settings, remove the pod and rotate it 180 degrees before putting it back into the device. You’ll notice that one side of the pod has three markings near the bottom. If you insert the pod with that side facing the device’s LED indicator, you’ll get the more open airflow setting. If you insert the pod the opposite way, you’ll get the more restrictive airflow setting.

You can also adjust the Endura M18 by changing its power level. The Innokin Endura can operate at 10 or 13.5 watts. To switch between the two, press the button on the bottom of the device three times to turn it off. While the device is off, hold the button. The LED cycles between green (10 watts) and purple (13.5 watts). Release the button when the LED shows the setting you want. Turn the device back on and continue vaping.

How to Fix Problems With the Innokin Endura M18

One of the best things about using an Innokin Endura is the fact that every Endura vape pen is the result of years of product research, development and iteration. The Endura brand has been around for many years, and Innokin improves the brand’s technological underpinnings with each new model. If you do experience a problem with your Innokin Endura M18, though, you’ll find the help you need right here. Use these tips to fix the problems that might occur with the Innokin Endura M18.

Innokin Endura M18 Not Charging

The Innokin Endura M18 features USB-C charging, which is a great thing because USB-C cables tend to be very reliable. With that being said, if you’re having trouble getting your M18 to charge, the cable is the most likely culprit. Try charging the device with a different cable, and if that doesn’t work, try charging it with a different computer. Don’t use a “quick charging” mains adapter for a smartphone or tablet; fast chargers can cause vaping devices to overheat.

Innokin Endura M18 Not Hitting

If your Innokin Endura M18 isn’t hitting when you puff on it, try these steps to resolve the issue.

  • Press the button three times quickly to turn the device on.
  • Make sure that the battery is fully charged.
  • Remove the pod and reseat the coil.
  • Replace the coil.

Innokin Endura M18 Gurgling

In a small vaping device like the Innokin Endura M18, it’s easy to overwhelm the device’s ability to manage airflow if you puff too firmly when vaping. If you puff too firmly on the device – like you might puff more firmly on a cigarette if you wanted it to burn down more quickly – you’ll end up sucking e-liquid into the pod’s centre air channel, which is what’s causing the gurgling noise. You can prevent your Endura M18 from gurgling by inhaling gently.

If you want to get more vapour out of the Endura M18, try adjusting the airflow and increasing the wattage as described above. If you still find the experience unsatisfying, consider trying an e-liquid with a higher nicotine strength.

Innokin Endura M18 Leaking

When you fill the Innokin Endura M18 pod, don’t try to fill it all the way to the top. If you don’t leave a little room in the pod’s reservoir, you’ll push e-liquid out when you close the pod’s silicone plug.

Anything that causes a vape pod to gurgle can also cause leaking, so the information in the previous section also applies here. If your Innokin Endura M18 makes a gurgling sound when you vape, it means that e-liquid is caught in the pod’s centre air channel. E-liquid caught in the air channel can also drip back down to the bottom of the pod and eventually leak out of the air intake vent. If you always inhale gently when vaping – and you always leave a little room at the top when refilling the pod