Innokin Go S: Instruction Manual and Guide

If you’ve ever found yourself wishing that you could find a vaping device combining the convenience and disposability of a pod system with the flavour and vapour production of a full-sized tank, the Innokin Go S is that device. It’s a vape pen that comes with a truly proper tank featuring adjustable airflow, a long-lasting cotton and wood pulp wick and a coil that puts out dense, flavourful clouds.

After you’ve used the tank for a while and the flavour quality has begun to suffer, though, there’s no need to dirty your hands replacing the atomizer coil. Instead, you’ll throw the entire tank away and start using a new one. The Innokin Go S represents a completely new concept of how a vape pen ought to work, and in this instruction manual, you’re going to learn how to use it.

If you’re looking for a vaping device that can deliver higher flavour quality than what you’re currently using – or you’re completely new to vaping and want a device that’s both simple and satisfying – we think that you will love the Innokin GO S. You can grab it right here for just £16.99.

How to Use the Innokin Go S

If you find the average instruction manual for a vaping device to be a bit indecipherable, we think that you’re going to appreciate this Innokin Go S instruction manual. On this page, we’ll explain the most important things that you need to know about using this vape pen. By the time you’re done reading, you’ll be ready to start using your new device right away.

How to Charge the Innokin Go S

The Innokin Go S includes a charging cable and has a micro USB port next to the fire button. Connect the vape pen to your computer using the included cable and wait a while for the battery to charge. When the device’s indicator light is green, the charge cycle is complete.

How to Fill the Innokin Go S Tank

Next to the mouthpiece at the top of the Innokin Go S tank, you’ll see an arrow. Push the top section of the tank in the direction of the arrow to reveal the filling port. Add e-liquid until the level of e-liquid is nearly – but not quite – at the top. Always leave a little room at the top of the tank when filling the Innokin Go S, because that helps to prevent the tank from leaking.

Since the tank of the Innokin Go S is disposable, taking care of the tank’s atomizer coil is extremely important. If the coil’s cotton wick burns, it’ll ruin the tank’s flavour, and you’ll have no choice but to replace the entire tank. To ensure that the coil’s wick is completely wet, you should wait several minutes to begin vaping after you’ve filled the tank for the first time. You should also remember to refill the tank before it is completely empty.

 

 

How to Replace the Innokin Go S Tank

When you’re no longer happy with the flavour or vapour production of the Innokin Go S tank, it’s time to discard the tank and install a new one. Twist the tank counterclockwise to remove it from the vape pen. Twist a new tank into the vape pen’s threading and fill the tank’s reservoir. After filling the new tank, don’t forget to wait several minutes before vaping.

If you take care of the Innokin Go S tank, you should find that it lasts several days – possibly even a week or two – before you need to replace it. If you find that the tank’s flavour quality seems to decline much more quickly than that, consider switching to an e-liquid that doesn’t use sucralose as a sweetener. Sucralose creates a crusty layer on an atomizer coil that shortens the coil’s life. If you find that your vape juice tastes almost as sweet as candy, it probably contains sucralose.

How to Vape With the Innokin Go S

After you’ve charged the battery and filled the tank, it’s time to start vaping with the Innokin Go S. Press the fire button five times quickly to turn the device on. To vape, puff on the tank’s mouthpiece while holding the fire button. To adjust the tank’s airflow, rotate the collar on the bottom of the tank.

As you vape, the indicator light on the Innokin Go S changes colour to let you know how much battery life remains. When the light is green, the battery is nearly full. When the light is green and red, the battery is 20-70 percent full. When the light is red, the battery is less than 20 percent full, and you’ll need to recharge the device soon.

How to Fix Problems With the Innokin Go S

As you’ve learned from reading this instruction manual, the Innokin Go S is an extremely simple device. There’s no reason why it shouldn’t give you trouble-free service for a very long time. If you do happen to experience a problem with the Innokin Go S, you’ll find the answer right here.

Above, we’ve already discussed the most likely causes if your Innokin Go S leaks (overfilling the tank) or has poor coil life (using sweetened e-liquid or failing to wait for the wick to become completely wet after filling the tank). Next, we’ll discuss the three other problems that you might experience with the Innokin Go S and explain what you can do to fix them.

Innokin Go S Not Charging

If your Innokin Go S doesn’t charge when you connect it to your computer, try these steps to resolve the issue.

  • Replace the charging cable. Once it’s been in use for a while, a USB cable can develop structural flaws that cause it to deliver power unreliably.
  • Try connecting the Innokin Go S to a different computer or to a different USB port on the same computer.
  • Make sure that the vape pen’s charging port doesn’t contain dust, pocket lint or other contaminants that could prevent the charging cable from making a good connection. You can remove contaminants safely with a toothpick.

Innokin Go S Not Hitting

If the Innokin Go S doesn’t produce vapour when you press the fire button, make sure that the battery is fully charged and that the device is turned on. You can turn the vape pen on and off by pressing the fire button five times quickly.

If the device still isn’t hitting, it’s possible that the tank isn’t making a good electrical connection with the vape pen. Remove the tank and clean the threading at the top of the vape pen with a cotton swab. If that doesn’t resolve the issue, you should replace the tank.

Innokin Go S Gurgling

The Innokin Go S is designed to have the ideal airflow characteristics for a cigarette-like mouth-to-lung vaping experience. Unlike a cigarette, though, a vaping device won’t produce a bigger cloud if you puff harder on it. With the Innokin Go S or any other mouth-to-lung vaping device, puffing too firmly will cause the e-liquid in the tank to overwhelm the atomizer coil’s wick and flood the coil, creating a gurgling sound. To prevent the Innokin Go S from gurgling, use gentle air pressure when you puff on the device.