5 x Innokin Prism T20 Coils

Innokin Prism T20 Replacement Coils are the original 1.5Ω coils designed for the Innokin Endura T20 kit and Prism T20 vape tank. Built for low-wattage mouth-to-lung vaping, they provide a tighter draw, moderate vapour production and a smooth, flavour-focused vape at around 12-14W.

These genuine Innokin replacement coils use a simple push-fit design, making routine coil changes quick and straightforward. Their higher 1.5Ω resistance makes them particularly well suited to 50/50 e-liquids, nic salts and traditional MTL vaping.

Need the matching tank? These coils are designed for the Innokin Prism T20 Vape Tank.

  • Pack of 5 replacement coils
  • 1.5Ω resistance
  • Recommended wattage: 12-14W
  • Designed for mouth-to-lung vaping
  • Push-fit installation
  • Compatible with the Innokin Prism T20 tank and Endura T20 kit
  • Ideal for 50/50 e-liquids and nic salts

What's Included?

  • 5 x Innokin Prism T20 1.5Ω Replacement Coils

Please note: These are original T20 coils and are not compatible with the Innokin T20S or Prism S system.

Order before 2 PM Monday to Friday for same-day dispatch. UK orders over £30 also qualify for free shipping.

Innokin Prism T20 Coil Guide

Replacement Coils for the Original Innokin T20

These 1.5Ω Prism coils are made specifically for the original Innokin T20 system. They're designed for low-power mouth-to-lung vaping, with a recommended operating range of 12-14W and a tighter inhale than the low-resistance coils found in modern sub-ohm tanks.

If you already use the Innokin Prism T20 tank, this is the replacement coil you need when flavour begins to fade or your current coil reaches the end of its useful life.

1.5Ω for MTL Vaping

The relatively high 1.5Ω resistance is designed for a traditional mouth-to-lung inhale. It produces a modest amount of vapour at low wattage and works particularly well for vapers who prefer a tighter, cigarette-style draw.

12-14W Power Range

Prism T20 coils don't require a powerful mod. They operate at just 12-14W, helping to keep battery consumption and e-liquid use relatively low compared with high-powered sub-ohm coils.

Simple Push-Fit Installation

The T20 uses a push-fit coil system rather than a threaded design. Once you've accessed the bottom of the tank, the old coil pulls out and the replacement pushes firmly into its place.

Five Coils Per Pack

Each pack contains five replacement coils, giving you a ready supply for routine maintenance without needing to order a new coil every time performance begins to drop.

Innokin T20 Coil Compatibility

These coils are compatible with the original Innokin Prism T20 tank and the Innokin Endura T20 vape kit.

T20 and T20S coils are not interchangeable. Despite the almost identical names, the Innokin T20S uses the separate Prism S coil family. If your tank or kit says T20S rather than T20, these are not the coils you need.

If you need the tank that matches these coils, see the Innokin T20 Vape Tank.

What E-Liquid Works Best with Prism T20 Coils?

50/50 Vape Juice

A balanced 50VG/50PG e-liquid is an excellent all-round choice for the 1.5Ω T20 coil. Its relatively thin consistency can move easily through the wick at the low wattages for which this coil is designed.

Nic Salts

The T20's low vapour output and MTL draw also make it well suited to nicotine salt e-liquids. This is quite different from high-powered sub-ohm coils, which normally require much lower nicotine strengths.

Very thick high-VG shortfills aren't the natural match for this type of low-wattage MTL coil. For dependable wicking and consistent performance, 50/50 e-liquid is the safer choice.

How to Replace an Innokin T20 Coil

1. Remove the Tank

Take the Prism T20 tank off your battery or vape mod and make sure there isn't enough e-liquid remaining to spill when you open the tank.

2. Remove the Used Coil

Access the coil from the base of the tank and pull the old push-fit coil straight out.

3. Install the New Coil

Push a fresh 1.5Ω T20 coil firmly into position, making sure it's fully seated before reassembling the tank.

4. Refill and Wait

Fill the tank with e-liquid and leave it standing for several minutes before vaping. This gives the fresh wick time to become thoroughly saturated.

Don't skip the soaking time: Firing a brand-new coil before its wick has absorbed enough e-liquid can scorch the cotton. Once that happens, the burnt flavour may remain and the coil will usually need replacing.

When Should You Replace a T20 Coil?

Vape coils are consumable parts, so every T20 coil will eventually need replacing. There isn't a fixed lifespan because usage varies considerably, but the tank will usually give you some fairly obvious clues when the coil is nearing the end.

Replace your Prism T20 coil if you notice:

  • A persistent burnt or unpleasant taste
  • Noticeably weaker flavour
  • Reduced vapour production
  • Performance that doesn't improve after refilling the tank

The e-liquid you use can also affect coil life. Very sweet vape juices can leave residue on the heating element more quickly, so you may find yourself replacing coils more frequently when using heavily sweetened flavours.

How to Make Your Innokin T20 Coils Last Longer

Keep the Wick Wet

Don't continue vaping once the tank is effectively empty. Keeping enough e-liquid around the coil helps prevent the wick from drying out and scorching.

Stay Within 12-14W

If you're using the T20 tank on an adjustable-wattage device, remain within the coil's intended power range. Excessive power can overheat the wick and shorten coil life.

Prime Every New Coil

After fitting a fresh coil, refill the tank and give it several minutes before vaping. Proper saturation is one of the easiest ways to avoid ruining a coil prematurely.

Watch Very Sweet E-Liquids

Sweetened vape juice can leave deposits on the coil over time. If you're replacing coils unusually often, trying a less heavily sweetened e-liquid may help.

Innokin Prism T20 Coil FAQs

What resistance are Innokin T20 coils?

Original Innokin Prism T20 replacement coils have a resistance of 1.5Ω and are designed for mouth-to-lung vaping.

What wattage should I use with a T20 coil?

The recommended range for the 1.5Ω Prism T20 coil is 12-14W.

Do these coils fit the Innokin T20S?

No. The T20S uses Prism S coils, which are a different coil family. These 1.5Ω coils are for the original T20 tank and Endura T20 kit.

Do Prism S coils fit the original T20 tank?

No. Prism S/T20S coils are not replacements for original Prism T20 coils. If you have the original T20 tank, use the 1.5Ω T20 coils sold on this page.

Can I use nic salts with an Innokin T20 coil?

Yes. The 1.5Ω resistance, low operating wattage and MTL airflow make the T20 well suited to 50/50 nic salt e-liquids as well as conventional freebase vape juice.

How many Innokin T20 coils are in a pack?

Each pack contains five 1.5Ω replacement coils.

How long does an Innokin T20 coil last?

There isn't a fixed lifespan. How often you vape, the e-liquid you use and whether the wick is kept properly saturated can all affect coil longevity. Replace the coil once flavour or vapour noticeably deteriorates or a persistent burnt taste develops.