Your Cart is Empty
5 x Geekvape Z Series Mesh Replacement Coils
£13.99
Geekvape Z Series Replacement Coils are high-performance mesh coils designed for powerful direct-to-lung vaping. Also known as Geekvape Mesh Z coils, they use a large mesh heating surface to produce dense vapour and clear, consistent flavour at higher wattages.
Available in four resistance options, the Z Series gives you plenty of choice depending on whether you prefer a cooler, slightly less powerful vape or a warmer and more intense DTL experience. Each pack contains five genuine Geekvape replacement coils.
If you're looking for a compatible device or want to upgrade your current setup, take a look at our Geekvape Vape Kits.
- Pack of 5 replacement coils
- Designed for direct-to-lung vaping
- Mesh heating technology
- Push-fit installation
- Four resistance options available
- Suitable for high-VG e-liquids
Available Geekvape Z Coil Options
- Z0.15Ω KA1 Mesh: 80-90W
- Z0.2Ω KA1 Mesh: 70-80W
- Z0.25Ω KA1 Dual Mesh: 45-57W
- Z0.4Ω KA1 Mesh: 50-60W
What's in the Box?
- 5 x Geekvape Z Series Replacement Coils
Order before 2 PM Monday to Friday for same-day dispatch. UK orders over £30 also qualify for free shipping.
Geekvape Z Coil Guide
Geekvape Z Series Coils: Which One Should You Choose?
Geekvape's Z Series is designed for sub-ohm tanks and higher-powered DTL vaping. All four options use mesh heating elements, but the resistance and recommended wattage make a noticeable difference to vapour warmth, airflow and e-liquid consumption.
The best option largely comes down to how powerful you like your vape. Lower-resistance Z coils generally suit higher wattages and a warmer, more intense inhale, while the 0.25Ω and 0.4Ω options operate at lower power and can offer a slightly more relaxed DTL experience.
Geekvape Z Coil Resistance & Wattage Guide
| Coil | Resistance | Recommended Wattage | Best For |
|---|---|---|---|
| Z0.15 | 0.15Ω | 80-90W | Warm, powerful DTL vaping and large vapour production |
| Z0.2 | 0.2Ω | 70-80W | High-powered DTL vaping with a good balance of flavour and vapour |
| Z0.25 Dual Mesh | 0.25Ω | 45-57W | Lower-wattage DTL vaping with dual-mesh construction |
| Z0.4 | 0.4Ω | 50-60W | A cooler DTL vape with lower power requirements |
Z0.15Ω: Maximum Power
The 0.15Ω Z coil has the highest recommended wattage of the four options at 80-90W. Choose it if you enjoy a particularly warm vape with plenty of airflow and substantial cloud production.
Z0.2Ω: Balanced High-Power DTL
Rated for 70-80W, the 0.2Ω version still delivers a powerful DTL experience but doesn't require quite as much wattage as the 0.15Ω coil. It's a good middle ground for users who want strong flavour and vapour without running at 80W or above.
Z0.25Ω: Dual Mesh at Lower Wattage
The 0.25Ω version uses a dual-mesh design and operates at 45-57W. It suits vapers who want the broad heating surface of a mesh coil while keeping their power level and e-liquid consumption a little more moderate.
Z0.4Ω: Cooler DTL Vaping
With a recommended range of 50-60W, the 0.4Ω coil provides a cooler and somewhat less aggressive vape than the lowest-resistance options. It's a useful choice if you prefer DTL vaping without pushing your mod towards very high wattages.
What E-Liquid Should You Use with Geekvape Z Coils?
Geekvape Z Series coils are designed for sub-ohm vaping and work best with thicker vape juices. A 70% VG e-liquid is a good starting point for all four coil options, particularly when vaping towards the middle or upper end of the recommended wattage range.
Because these coils produce considerably more vapour per puff than a small MTL kit, they are normally paired with lower nicotine strengths. Many DTL users choose 3mg e-liquid or nicotine-free shortfills, although the right strength ultimately depends on your requirements.
Before using a new coil: Fill your tank and allow the coil to soak for several minutes before vaping. Starting at the lower end of the recommended wattage range and gradually increasing the power can also help the fresh wick bed in properly.
How to Replace a Geekvape Z Series Coil
1. Remove the Old Coil
Make sure the tank is sufficiently empty, remove it from your vape kit if necessary and access the coil from the base. Pull the used push-fit coil firmly out of the tank.
2. Fit the New Coil
Push the replacement Z coil fully into position, checking that it sits securely and evenly before reassembling the tank.
3. Refill and Let It Soak
Refill the tank with your chosen e-liquid and give the new coil several minutes to absorb the liquid thoroughly before taking your first puff.
4. Start at a Lower Wattage
Begin near the bottom of the coil's recommended power range and increase the wattage gradually until you reach the warmth and vapour production you prefer.
How Long Do Geekvape Z Coils Last?
There isn't a fixed replacement interval because coil life depends heavily on how often you vape, your wattage and the e-liquid you use. Very sweet e-liquids can leave deposits on the mesh and wick more quickly, while consistently vaping at very high power can also shorten coil life.
Common signs that it's time for a new coil include weaker flavour, reduced vapour production, darker e-liquid around the coil or a burnt taste that doesn't disappear after refilling.
Are Geekvape Z Coils Right for You?
These coils are intended for vapers who enjoy an open, direct-to-lung draw and want considerably more vapour than a typical pod system produces. They're particularly well suited to high-VG shortfills and lower-nicotine e-liquids.
If you're looking for a complete setup that uses Geekvape's high-performance sub-ohm hardware, browse our current selection of Geekvape Vape Kits.
Geekvape Z Series Coil FAQs
Are Geekvape Z coils the same as Geekvape Mesh Z coils?
Yes. You'll often see these replacement coils referred to as Geekvape Z Series coils, Mesh Z coils or Zeus coils. The important thing is to check the resistance and compatibility required by your tank before ordering.
How many Geekvape Z coils are in a pack?
Each pack contains five replacement coils of your selected resistance.
Which Geekvape Z coil produces the most vapour?
The 0.15Ω Z coil has the highest recommended power range at 80-90W, making it the strongest choice of the four for users seeking a warm, high-powered vape with substantial vapour production.
Which Geekvape Z coil uses the lowest wattage?
The 0.25Ω dual-mesh coil has the lowest recommended range at 45-57W. The 0.4Ω version is also relatively moderate at 50-60W.
Can you use nic salts with Geekvape Z coils?
These are high-powered sub-ohm coils, so they are generally better suited to low-strength, high-VG e-liquids than to the higher-strength nic salts commonly used in small MTL pod kits.
Why does my Geekvape Z coil taste burnt?
A burnt taste can occur if the wick hasn't had enough time to absorb e-liquid, the tank runs too low on liquid or the coil is used above its recommended wattage. If a coil remains burnt after refilling and allowing it to soak, it will usually need replacing.