Aspire Pods from £4.99: Fast Shipping

Aspire Pod Buying Guide

Find the Right Replacement Pods for Your Aspire Vape

Replacing a worn cartridge helps your Aspire vape maintain its original flavour, vapour production and draw quality. Aspire produces several separate pod systems, so it is important to match the cartridge to the full name of your device rather than relying on the Aspire brand alone.

Our current Aspire pod collection includes TSX pods for the Cyber X and Cyber S, Gotek cartridges for the Gotek device family and replacement pods for the original Aspire Cobble. All three types contain built-in coils, making maintenance quick and straightforward.

Shop Aspire Pods by Device Series

Aspire TSX Pods

Aspire TSX pods are top-filling cartridges designed for the Cyber X and Cyber S. They are available with either a 0.8- or 1.0-ohm built-in mesh coil.

Two cartridges per pack
2 ml refillable capacity
Top-filling design
Integrated mesh coils
0.8- and 1.0-ohm options
Suitable for MTL and airier MTL vaping

Shop TSX Pods

Aspire Gotek Pods

Aspire Gotek pods contain an integrated 0.8-ohm mesh coil and use a convenient side-filling system. They are compatible with several devices across the Gotek range.

Two cartridges per pack
2 ml refillable capacity
Side-filling design
Built-in 0.8-ohm mesh coil
Suitable for MTL and loose MTL vaping
Works well with 50/50 e-liquid

Shop Gotek Pods

Aspire Cobble Pods

Aspire Cobble replacement pods are designed for the original Cobble AIO. Each cartridge contains an integrated 1.4-ohm coil for low-powered mouth-to-lung vaping.

Three cartridges per pack
Built-in 1.4-ohm coil
No separate coil changes
Tight MTL draw
Low vapour production
Designed for the original Aspire Cobble

Shop Cobble Pods

Aspire Pod Compatibility Guide

Aspire TSX, Gotek and Cobble cartridges have different shapes and electrical connections. They cannot be swapped between the three platforms.

Pod Type	Resistance	Vaping Style	Compatible Devices
TSX Pod	0.8Ω or 1.0Ω	MTL or airy MTL	Aspire Cyber X and Aspire Cyber S
Gotek Pod	0.8Ω	MTL or loose MTL	Aspire Gotek X, Gotek S, Gotek Pro, Gotek X II, Gotek X III and Gotek Nano
Cobble Pod	1.4Ω	Tight MTL	Original Aspire Cobble AIO

Check the full device name: Aspire also produces Minican, Flexus, Vilter, Favostix, Pixo and other pod systems. Cartridges from those ranges do not fit the TSX, Gotek or Cobble devices featured here.

Which Devices Use Aspire TSX Pods?

TSX cartridges were created specifically for Aspire’s Cyber X and Cyber S devices.

Aspire Cyber X

The Aspire Cyber X is a compact box-shaped pod vape with adjustable airflow, three power modes and a choice of button or inhale activation.

It supports both the 0.8- and 1.0-ohm TSX cartridges.

Aspire Cyber S

The Aspire Cyber S uses the same two TSX resistance options in a slim pen-style format.

It is a good choice for users who prefer a narrow device while retaining both button and inhale activation.

Not compatible with the Cyber G: The Aspire Cyber G uses TG pods rather than TSX cartridges. Despite the similar name, the two pod platforms have different connections.

Which Aspire TSX Pod Resistance Should I Choose?

0.8-Ohm TSX Pod

The 0.8-ohm pod produces a little more warmth and vapour. It is the better option for a looser MTL draw or a lightly restricted direct-to-lung inhale.

Use a lower nicotine strength if the increased vapour makes your usual e-liquid feel too strong.

1.0-Ohm TSX Pod

The 1.0-ohm cartridge provides a tighter and cooler mouth-to-lung draw with more discreet vapour production.

It is particularly well suited to nic salt e-liquid and users moving to vaping from cigarettes.

Not sure which one to order? Choose 1.0 ohm for the tighter and more cigarette-like draw, or 0.8 ohm for slightly greater warmth, airflow and vapour.

Which Devices Use Aspire Gotek Pods?

The 0.8-ohm Gotek cartridge is shared by several devices in Aspire’s Gotek range. Current compatible kits available from Simply ELiquid are linked below.

Available from Simply ELiquid

All three devices accept the 0.8-ohm refillable Gotek cartridge sold in this collection.

Other Compatible Gotek Devices

Aspire Gotek X II
Aspire Gotek X III
Aspire Gotek Nano

These newer devices also use the wider Gotek pod platform and accept the 0.8-ohm cartridge.

Some newer Gotek devices also support a 0.6-ohm refillable cartridge. The product currently featured in this collection is the broadly compatible 0.8-ohm version.

Which Device Uses Aspire Cobble Pods?

Compatible Device

Original Aspire Cobble AIO Kit

The Cobble cartridge was designed specifically for Aspire’s original pebble-shaped pod vape.

Not a Universal Aspire Pod

Cobble cartridges do not fit Cyber, Gotek, Minican, Flexus or other Aspire devices.

Check that your vape is labelled simply as the Aspire Cobble before ordering these replacement pods.

Which Aspire Pod Resistance Is Right for Me?

Resistance	Draw	Vapour Level	Best For
0.8Ω	Moderate or airy	Medium	A warmer vape with more vapour. Available in both the TSX and Gotek platforms.
1.0Ω	Moderately tight	Low to medium	A balanced MTL draw with good suitability for nic salts and stronger nicotine e-liquids.
1.4Ω	Tight	Lower	A cooler, low-powered vape for the original Aspire Cobble and a traditional cigarette-like inhale.

Resistance does not determine physical compatibility: Two cartridges with the same resistance can still have completely different shapes and connections. Match the pod family before considering the resistance.

Do Aspire Pods Have Replaceable Coils?

The TSX, Gotek and Cobble products in this collection all have permanently installed coils. You refill and reuse each cartridge until the coil’s flavour and vapour production begin to decline.

Advantages of Built-In Coils

No separate coil fitting
Quick and clean replacement
No need to identify a separate coil family
Ideal for straightforward everyday vaping

When the Coil Wears Out

Replace the complete cartridge rather than attempting to remove the heating element.

Keeping a spare pack available means that you can restore the device quickly when the current pod begins to taste burnt or weak.

How to Fill an Aspire Pod

The position of the filling port depends on the cartridge. Current TSX pods fill from the top, while Gotek cartridges use a silicone-covered opening on the side.

Remove the cartridge from the device if needed to reach the filling opening comfortably.
Open the mouthpiece or silicone stopper according to the pod design.
Insert the nozzle of your e-liquid bottle into the filling port. Avoid putting liquid into the central airflow chimney.
Fill the cartridge without completely filling the remaining air space.
Close the filling port firmly and wipe away any liquid from the exterior of the pod.
Place the cartridge back into the device and make sure that it is seated correctly.
When using a new pod, wait five to ten minutes before vaping.

Waiting after the first fill gives the dry cotton surrounding the coil time to absorb the e-liquid. This helps prevent a burnt first puff and premature pod failure.

What E-Liquid Should I Use in Aspire Pods?

50/50 E-Liquid

A balanced 50/50 VG/PG e-liquid is the safest all-round choice for the Aspire cartridges in this collection. It flows easily through compact wicking ports while producing satisfying flavour and vapour.

Nic Salt E-Liquid

Nic salt e-liquids provide a smooth throat hit and work particularly well with the 1.0-ohm TSX pod and 1.4-ohm Cobble cartridge.

Using the 0.8-Ohm Pods

The 0.8-ohm TSX and Gotek cartridges produce more vapour than the higher-resistance options. They can be used with nic salts, although a lower nicotine strength may feel more comfortable.

Freebase E-Liquid

Pod-friendly freebase e-liquid can also be used. Choose a nicotine strength that suits the pod resistance and the amount of vapour produced.

Avoid very thick e-liquid: High-VG blends may not soak into these compact coils quickly enough, particularly during frequent vaping. This can lead to dry or burnt-tasting puffs.

When Should You Replace an Aspire Pod?

Pod lifespan varies according to the resistance, e-liquid, vaping frequency and length of each puff. Heavily sweetened e-liquids often leave residue on a coil more quickly.

Replace the cartridge when you notice:

A persistent burnt, dry or stale taste
Flavour becoming noticeably weaker or less accurate
A reduction in vapour production
Repeated gurgling, flooding or spitting
Persistent leaking despite correct filling
E-liquid inside the cartridge becoming unusually dark

Since the coils are integrated, replace the full pod when its heating element reaches the end of its usable life.

How to Help Aspire Pods Last Longer

Prime Every New Pod

Wait five to ten minutes after filling a new cartridge before vaping so that the cotton becomes fully saturated.

Refill Before It Runs Dry

Keep the visible wicking openings covered with e-liquid. Heating a dry wick can scorch it permanently.

Avoid Chain Vaping

Leave a short pause between puffs to give the wick time to absorb more liquid before the coil heats again.

Use Suitable E-Liquid

A pod-friendly 50/50 blend supports reliable wicking. Very thick or heavily sweetened liquids may shorten pod life.

Keep the Contacts Clean

Wipe condensation from the bottom of the pod and the device connection periodically to maintain reliable contact.

Close the Filling Port Securely

Make sure the mouthpiece or silicone stopper is fully closed after each refill to help preserve the cartridge’s seal.

Why Buy Aspire Pods from Simply ELiquid?

Pods for Current and Classic Devices

Choose cartridges for newer Cyber and Gotek kits as well as replacement pods for the original Aspire Cobble.

Simple Built-In-Coil Designs

Every pod in the current collection contains its own coil, making routine replacement fast and straightforward.

Fast Weekday Dispatch

Orders placed before 2 PM from Monday to Friday are eligible for same-day dispatch, helping you replace a worn cartridge without unnecessary delay.

Free UK Shipping Available

Spend more than £30 on pods, e-liquid and other vaping essentials to qualify for free UK shipping.

Aspire Pods: Frequently Asked Questions

Do all Aspire pods fit every Aspire vape?

No. Aspire produces several separate cartridge platforms. Match the full pod and device names before ordering.

Which devices use Aspire TSX pods?

TSX pods are designed for the Aspire Cyber X and Cyber S. They do not fit the Cyber G, which uses TG cartridges.

Which TSX resistance is best for nic salts?

The 1.0-ohm pod is the best general choice for a tight MTL draw with nic salts. Choose the 0.8-ohm version for increased warmth and vapour.

Which devices use Aspire Gotek pods?

The 0.8-ohm refillable pod fits the Gotek X, Gotek S, Gotek Pro, Gotek X II, Gotek X III and Gotek Nano.

Do Gotek pods have replaceable coils?

No. The mesh coil is permanently built into the cartridge. Replace the complete pod when its flavour begins to decline.

Are Aspire Cobble pods compatible with other devices?

No. Cobble cartridges were designed specifically for the original Aspire Cobble AIO.

How many pods are included?

TSX and Gotek cartridges are supplied in packs of two. Aspire Cobble replacement pods are supplied in packs of three.

Can I use nic salt and freebase e-liquid?

Yes. Both types can be used when they have a pod-friendly consistency. Match the nicotine strength to the resistance and amount of vapour produced.

Can I use high-VG e-liquid in Aspire pods?

These compact cartridges generally work best with a balanced 50/50 or higher-PG liquid. Very thick high-VG blends may not wick reliably.

How long does an Aspire pod last?

There is no fixed lifespan. Longevity depends on the e-liquid, resistance and frequency of use. Replace the cartridge when flavour and vapour decline noticeably.

Why does my new Aspire pod taste burnt?

The wick may not have absorbed enough e-liquid before the first puff. Fill the pod and allow it to stand for five to ten minutes before vaping.

Why is my Aspire pod leaking?

Check that the filling port is closed firmly, the pod is not overfilled and the cartridge has no cracks. Wipe condensation from beneath the pod periodically.