Your Cart is Empty
OXVA Xlim SS Replacement Pods – 3 Pack
£9.50
OXVA Xlim SS Replacement Pods – 3 Pack
The Xlim SS Pods are the newest addition to the Xlim range, designed specifically for the Xlim Pro 2 DNA Kit. Featuring a convenient top-fill system and stainless steel mesh coils which have up to 30% longer coil life. These are the first Xlim pods to support temperature control with the Evolv DNA chipset— offering consistent flavour with no dry hits.
Available in 0.6Ω, 0.8Ω, and 1.2Ω resistances, they’re ideal for both RDL (Restricted Direct Lung) and MTL (Mouth to Lung) vaping. These pods are compatible with 50/50 nic salts or freebase e-liquids, and while they fit other Oxva vapes, temperature control is exclusive to the Xlim Pro 2 DNA.
Key Features:
Engineered for Xlim Pro 2 DNA
Stainless steel mesh coils
Top-fill design
0.6Ω, 0.8Ω, 1.2Ω options
Ideal for RDL & MTL vaping
Works with nic salts & freebase
Anti-dry hit protection
No flavour loss over time
Extended coil lifespan (up to 30%)
Each pack contains 3 pods.
OXVA Xlim SS Pod Guide
Stainless-Steel Pods for the OXVA Xlim Pro 2 DNA
OXVA Xlim SS pods are purpose-built replacement cartridges for the OXVA Xlim Pro 2 DNA. Their stainless-steel mesh coils allow the device’s Evolv DNA chipset to monitor changes in coil temperature and adjust its output before the wick becomes excessively hot.
The result is a more consistent flavour experience with protection against dry hits, access to Flavour Replay and a potentially longer pod lifespan. Each pack contains three top-filling 2 ml pods in your selected resistance.
Why Choose OXVA Xlim SS Pods?
Anti-Burn Protection
The DNA chipset monitors the stainless-steel coil while you vape. If the wick becomes too dry and the coil temperature rises abnormally, the device can reduce or interrupt power before a harsh dry hit occurs.
Smart Flavour Replay
Once you experience a puff with the warmth, vapour and flavour you prefer, the Replay function allows the device to reproduce that performance more consistently during later draws.
Consistent Flavour at Low Battery
The Xlim Pro 2 DNA manages its output to help prevent flavour from becoming noticeably weaker as the remaining battery level falls.
Extended Pod Life
By helping to prevent the coil from overheating when the pod is running low, the anti-burn system can reduce premature wick damage and extend cartridge life by up to 30%.
Stainless-Steel Mesh Coil
The broad mesh heating surface promotes even vapour production, while the temperature-sensitive stainless-steel material gives the DNA chipset the information it needs to manage heat accurately.
Convenient Top Filling
The filling port is positioned near the top of the cartridge, making regular refills quick and helping to reduce the mess associated with older bottom- or side-filling pod designs.
How Does the Anti-Burn System Work?
Stainless steel changes electrical resistance in a predictable way as it becomes hotter. The Evolv DNA chipset monitors those resistance changes while the coil is operating and uses them to estimate its temperature.
When there is enough e-liquid in the cartridge, the saturated wick helps to keep the coil within its expected temperature range. If the pod runs low or the wick cannot absorb liquid quickly enough, the coil begins heating more rapidly. The chipset recognises the unusual temperature rise and limits power before the cotton burns.
Important: Anti-burn protection greatly reduces the risk of dry hits, but you should still refill the cartridge when the e-liquid level becomes low. Keeping the wick saturated provides the best flavour and helps the pod last longer.
Which Xlim SS Pod Resistance Should I Choose?
The available resistance options cover everything from an airier restricted direct-to-lung draw to a tight and discreet mouth-to-lung experience. Choose your resistance before adding the pack to your basket.
| Resistance | Vaping Style | Experience | Best E-Liquid Match |
|---|---|---|---|
| 0.6 ohm | RDL or airy MTL | The warmest option, with increased airflow and more visible vapour production. | Lower-strength nic salts or pod-friendly freebase e-liquid with a balanced 50/50 blend. |
| 0.8 ohm | MTL | A balanced everyday option with moderate warmth, a smooth draw and satisfying flavour. | Ideal for most nic salt e-liquids and suitable 50/50 freebase liquids. |
| 1.2 ohm | Tight MTL | The coolest and most restricted option, with discreet vapour and a cigarette-like inhale. | Well suited to higher nicotine strengths and smooth nic salt e-liquids. |
Not sure which one to order? The 0.8-ohm pod is the most versatile choice for typical mouth-to-lung vaping. Choose 0.6 ohm for a warmer and airier draw or 1.2 ohm for a tighter inhale with less vapour.
Which OXVA Device Uses Xlim SS Pods?
Compatible Device
OXVA Xlim SS cartridges are designed for the OXVA Xlim Pro 2 DNA Pod Kit.
This device contains the Evolv DNA chipset required to use the stainless-steel coil’s temperature-control, anti-burn and Flavour Replay functions.
Other Pods for the DNA Device
The Xlim Pro 2 DNA can also use standard Xlim V2, V3 and EZ cartridges. Those pods will provide normal wattage-based operation but will not support the device’s anti-burn or Flavour Replay features.
Browse the full range of OXVA replacement pods to compare the available styles.
Compatibility warning: Oxva Xlim SS pods will work in other Oxva Xlim vapes, but the temperature limiting and Flavour Replay functions will only work with the Oxva Xlim Pro 2 DNA.
How to Fill an OXVA Xlim SS Pod
- Remove the cartridge from the device if you find this makes the filling port easier to access.
- Locate the silicone-covered filling opening near the top of the pod and lift the stopper carefully.
- Insert the nozzle of your e-liquid bottle into the filling port. Avoid adding liquid to the central airflow chimney.
- Fill the cartridge without completely filling the remaining air space at the top.
- Close the stopper securely and wipe away any e-liquid from the exterior of the pod.
- Insert the pod into the Xlim Pro 2 DNA and allow a new cartridge to stand for five to ten minutes before vaping.
Waiting after the first fill allows the cotton surrounding the mesh coil to absorb e-liquid fully. Anti-burn protection offers an extra safeguard, but properly priming the pod remains important for the best initial flavour.
How to Use Flavour Replay
- Fill and prime the pod, then vape normally until you experience a puff with your preferred flavour, warmth and vapour production.
- Press the Replay button on the Xlim Pro 2 DNA to save the characteristics of that puff.
- Continue vaping and allow the DNA chipset to reproduce the saved experience during subsequent draws.
- Turn Replay off and repeat the process whenever you change pods, switch e-liquid or want to create a different vaping experience.
What E-Liquid Should I Use?
Choose a Pod-Friendly Blend
A balanced 50/50 VG/PG e-liquid is the safest all-round option. It flows easily through the compact wicking ports and supports reliable saturation during regular vaping.
Match Strength to Resistance
The 0.8- and 1.2-ohm pods are particularly well suited to nic salts. The warmer 0.6-ohm option is usually better with a lower nicotine strength because it produces more vapour per puff.
Very thick high-VG liquids may struggle to soak into the wick quickly enough. The DNA chipset can help prevent overheating, but a liquid that is too thick may still produce weak flavour or repeatedly trigger the device’s protection.
When Should I Replace an Xlim SS Pod?
Anti-burn technology helps protect the wick from accidental damage, but the coil will still wear out gradually as residue builds up on its heating surface. Pod lifespan depends on your e-liquid, resistance, power setting and vaping frequency.
Consider replacing the cartridge when you notice:
- Flavour becoming noticeably weaker or less accurate
- A persistent stale, dark or altered taste
- Reduced vapour production despite a charged battery
- Frequent gurgling, flooding or leaking
- E-liquid inside the cartridge becoming unusually dark
- The device repeatedly limiting power despite the pod containing enough e-liquid
The stainless-steel coil is permanently installed inside the cartridge. When it reaches the end of its life, replace the entire pod rather than attempting to remove the coil.
Why Buy OXVA Xlim SS Pods from Simply ELiquid?
Three Pods Per Pack
Each pack contains three replacement cartridges in your selected resistance, giving you convenient spares whenever the current pod begins to lose flavour.
Three Resistance Options
Choose between 0.6-, 0.8- and 1.2-ohm cartridges to match your preferred airflow, vapour output and nicotine strength.
Fast Weekday Dispatch
Orders placed before 2 PM from Monday to Friday are eligible for same-day dispatch, helping you replenish your supply of replacement pods quickly.
Free UK Shipping Available
Spend more than £30 on pods, e-liquid and other vaping essentials to qualify for free UK shipping.
OXVA Xlim SS Pods: Frequently Asked Questions
How many Xlim SS pods are included?
Each pack contains three refillable cartridges in the resistance selected when placing your order.
Which vape is compatible with Xlim SS pods?
They are designed for the OXVA Xlim Pro 2 DNA. This device has the Evolv DNA chipset required to use the pods’ stainless-steel temperature-control features.
Can I use Xlim SS pods in a standard Xlim Pro 2?
No. The standard Xlim Pro 2 does not contain the anti-burn DNA chipset. Use regular Xlim V2, V3 or EZ pods with the standard version of the device.
Can standard Xlim pods be used in the Xlim Pro 2 DNA?
Yes. Standard Xlim V2, V3 and EZ cartridges can be used in the DNA device, but anti-burn protection and Flavour Replay are only available when an appropriate Xlim SS cartridge is installed.
What makes the SS pods different?
They contain stainless-steel mesh coils whose resistance changes predictably as they heat. The DNA chipset uses those changes to monitor temperature and reduce power when the wick becomes too dry.
Do Xlim SS pods prevent every burnt taste?
They are designed to prevent the dry hits caused by an overheated or insufficiently saturated wick. They cannot prevent flavour from declining as residue accumulates on an old coil, so worn cartridges will still need to be replaced.
Which resistance is best for nic salts?
The 0.8-ohm pod is a versatile choice for most nic salts. Choose 1.2 ohm for a tighter and cooler draw or 0.6 ohm for increased warmth, airflow and vapour production.
How much e-liquid does each pod hold?
Each UK-compliant OXVA Xlim SS cartridge holds up to 2 ml of e-liquid.
Are the coils replaceable?
No. The coil is permanently built into the cartridge. When the coil wears out, replace the complete pod.
Why is my device displaying a Fill Pod warning?
The DNA chipset may display this message when it detects the rapid temperature rise associated with a dry wick or low e-liquid level. Check the pod and refill it before continuing to vape.