Your Cart is Empty
OXVA Xlim EZ Replacement Pods – 3 Pack
£9.50
The OXVA Xlim EZ replacement pods feature a convenient top-fill design and are compatible with a variety of OXVA vapes. Each pod includes a built-in mesh coil and is available in multiple resistance options, making them suitable for both MTL (Mouth-To-Lung) and RDTL (Restricted Direct-To-Lung) vaping styles. The mesh coil heats e-liquid more efficiently, delivering enhanced flavour with every puff.
Key Features:
Refillable with top-fill design
Built-in mesh coil for rich flavour
Leak-resistant construction
Supports nicotine salts and freebase e-liquids
Available Resistances:
0.4Ω (RDL): 26–30W
0.6Ω (RDL): 20–25W
0.8Ω (MTL): 12–16W
1.2Ω (MTL): 10–12W
Each pack includes 3 pods.
OXVA Xlim EZ Pod Guide
Easy Top-Filling Pods for OXVA Xlim Vapes
OXVA Xlim EZ replacement pods combine the flavour quality of the Xlim platform with a quick and convenient top-filling system. Instead of removing a side-mounted silicone plug, you can open the clearly marked filling port at the top of the cartridge, add your e-liquid and close it again.
Each pod contains a built-in mesh coil, so there are no separate coil heads to install. This pack includes three 2 ml cartridges and is available in four resistance options covering both mouth-to-lung and restricted direct-to-lung vaping.
Why Choose OXVA Xlim EZ Pods?
Quick Top-Fill Design
The filling port is positioned at the top of the cartridge and marked in red, making it easy to locate. Open the port, add your e-liquid and close it securely before vaping.
Built-In Mesh Coil
Each cartridge contains its own fixed mesh coil. Mesh provides a broad heating surface that helps to produce consistent vapour and clear, well-defined flavour.
Leak-Resistant Construction
OXVA uses a sealed filling system, carefully arranged wicking material and multiple protective layers to help keep e-liquid inside the cartridge where it belongs.
Four Resistance Choices
Options ranging from 0.4 to 1.2 ohm allow you to choose between warmer RDL vaping, a balanced draw or a tighter and cooler MTL experience.
Which OXVA Xlim EZ Pod Should I Choose?
Lower-resistance pods use more power and produce a warmer, airier vape. Higher-resistance cartridges use less power and provide a tighter mouth-to-lung draw. Select your preferred resistance before adding the pack to your basket.
| Resistance | Power Range | Vaping Style | Best For |
|---|---|---|---|
| 0.4 ohm | 26–30W | RDL | The warmest option with the largest vapour output and most open draw. Best suited to lower-strength e-liquids and compatible higher-powered Xlim devices. |
| 0.6 ohm | 20–25W | RDL or airy MTL | A balanced choice offering noticeable warmth and vapour without requiring the most open restricted direct-to-lung draw. |
| 0.8 ohm | 12–16W | MTL | A smooth, moderately tight draw that works particularly well with nic salt e-liquid. |
| 1.2 ohm | 10–12W | Tight MTL | The coolest and most restricted option. Ideal for higher nicotine strengths, discreet vapour production and a cigarette-like inhale. |
Our general recommendation: Choose 0.8 ohm for a versatile everyday MTL vape, 1.2 ohm for the tightest draw, or 0.6 ohm if you prefer more warmth and airflow. The 0.4-ohm option is intended for experienced users seeking an RDL vape.
Which Vapes Are OXVA Xlim EZ Pods Compatible With?
Xlim EZ cartridges use OXVA’s widely shared Xlim pod connection and work with most standard devices in the OXVA Xlim range. Compatibility includes many older and newer Xlim models.
Compatible Xlim Devices Include
- OXVA Xlim Pro, Pro 2 and Pro 3
- OXVA Xlim 3 Ultra
- OXVA Xlim Go and Go 2
- OXVA Xlim SE and SE 2
- OXVA Xlim SQ, SQ Pro and SQ Pro 2
- OXVA Xlim Classic Edition
- Original OXVA Xlim pod devices
Important Compatibility Notes
The 0.4-ohm EZ cartridge is not compatible with the original Xlim SE, Xlim SQ or Xlim Pod devices. Choose a higher-resistance option when using one of those models.
These cartridges are not designed for the OXVA Xlim C, NeXlim or other OXVA product ranges that use a different pod connection.
Although Xlim EZ pods fit the Xlim Pro 2 DNA, they do not support the device’s DNA-specific anti-burn and flavour-replay functions. Those features require Oxva Xlim SS pods.
How to Fill an OXVA Xlim EZ Pod
- Remove the pod from your vape and hold it upright to make filling easier and reduce the chance of spills.
- Locate the red filling port at the top of the cartridge and open its cover carefully.
- Place the nozzle of your e-liquid bottle inside the filling opening. Do not pour e-liquid into the central airflow channel.
- Fill the cartridge without overfilling it, leaving a small amount of air inside the pod.
- Close the filling port firmly and wipe away any liquid from the outside of the cartridge.
- Insert the pod into your device. When it is new, wait five to ten minutes before vaping so the cotton can absorb the e-liquid fully.
What E-Liquid Should I Use in Xlim EZ Pods?
For 0.8- and 1.2-Ohm Pods
These resistances are designed primarily for MTL vaping and work especially well with 50/50 nic salts. They can also be used with suitably thin freebase e-liquids.
For 0.4- and 0.6-Ohm Pods
Lower-resistance cartridges provide a warmer vape and are usually best with lower nicotine strengths. A balanced 50/50 liquid remains the safest all-round choice for reliable wicking.
Avoid very thick high-VG e-liquids. Compact pod coils have relatively small wicking channels, and liquids with too much VG may not soak into the cotton quickly enough during repeated use.
OXVA Xlim EZ Pods vs. Xlim V2 Pods
Xlim EZ Pods
EZ cartridges use a convenient top-filling port and are available in 0.4-, 0.6-, 0.8- and 1.2-ohm options. They are the better choice when you want easy refilling and the widest resistance selection.
Xlim V2 Pods
V2 cartridges use a side-filling port that is accessed after removing the pod from the device. They remain a dependable choice for compatible Xlim kits but are not available in as many resistance options.
Both styles contain built-in coils and are replaced as complete cartridges when the coil reaches the end of its usable life.
How Long Does an OXVA Xlim EZ Pod Last?
Pod life varies according to your selected resistance, power level, e-liquid and vaping frequency. Sweet e-liquids tend to leave residue on the heating surface more quickly, while long or frequent puffs place greater demand on the coil and wick.
You should consider replacing the cartridge when you notice:
- A persistent burnt, dry or unpleasant taste
- Flavour becoming weaker or less accurate
- A noticeable reduction in vapour production
- Repeated gurgling, spitting or leaking
- E-liquid inside the pod becoming unusually dark
Because the coil is permanently built into the pod, you replace the full cartridge rather than fitting a separate coil head.
Why Buy OXVA Xlim EZ Pods from Simply ELiquid?
Convenient Three-Pack
Each box contains three cartridges in your selected resistance, giving you spare pods for replacing worn coils or keeping several e-liquid flavours in rotation.
Four Resistance Options
Choose a pod suited to your preferred draw, nicotine strength and vapour output instead of being limited to a single style of vaping.
Fast Weekday Dispatch
Orders completed before 2 PM from Monday to Friday are eligible for same-day dispatch, so you can replenish your pod supply without a long delay.
Free Shipping Available
Orders worth more than £30 qualify for free UK shipping, making it easy to order your replacement pods and favourite e-liquids together.
OXVA Xlim EZ Pods: Frequently Asked Questions
How many Xlim EZ pods are included?
Each pack contains three refillable OXVA Xlim EZ cartridges in the resistance selected when ordering.
How much e-liquid does each pod hold?
These UK-compliant Xlim EZ cartridges hold up to 2 ml of e-liquid.
Are Xlim EZ pods top filling?
Yes. The cartridges have a clearly marked filling port at the top, allowing you to refill without opening a silicone plug on the side of the pod.
Do the pods contain built-in coils?
Yes. The mesh coil is permanently installed inside the cartridge. When the coil wears out, replace the complete pod.
Which resistance is best for nic salts?
The 0.8- and 1.2-ohm options are particularly well suited to nic salt e-liquids. The 0.8-ohm version offers a balanced MTL draw, while the 1.2-ohm pod provides a tighter and cooler inhale.
Can I use the 0.4-ohm pod in every Xlim device?
No. The original Xlim SE, Xlim SQ and Xlim Pod devices do not support the 0.4-ohm EZ cartridge. The other resistance options provide broader compatibility across the range.
Are Xlim EZ pods compatible with the Xlim C?
No. The Xlim C uses a different cartridge with a replaceable-coil system and does not accept standard Xlim EZ pods.
Why should I wait before using a new pod?
The cotton inside a new cartridge begins dry. Waiting five to ten minutes after filling gives the e-liquid time to saturate the wick and reduces the risk of burning the coil on your first puff.
Can I keep different flavours in separate pods?
Yes. Using one cartridge for each flavour helps prevent flavour mixing and allows you to change e-liquids simply by swapping pods.